Note

The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.

Difference between revisions of "Translations:Install/Prepare Disk/28/en"

From Funtoo
Jump to navigation Jump to search
(Importing a new version from external source)
 
(Importing a new version from external source)
Line 1: Line 1:
Make sure you will not be overwriting any important data and that you have chosen the correct {{c|/dev/sd?}} device. Above, you can see that {{c|sda}} contains three partitions, {{c|sda1}}, {{c|sda2}} and {{c|sda3}}, and that {{c|sda3}} contains LVM volumes.
Make sure you will not be overwriting any important data and that you have chosen the correct {{c|/dev/sd?}} device. Above, you can see that SATA disk {{c|sda}} contains three partitions, {{c|sda1}}, {{c|sda2}} and {{c|sda3}}, and that {{c|sda3}} contains LVM volumes. If you are using an NVME disk, then you may see {{c|nvem0n1}} as your disk, and your partitions (if any exist yet) will be named {{c|nvme0n1p1}}, {{c|nvme0n1p2}}, etc. If you are installing on microSD Card for Raspberry Pi, your disk will likely be {{c|mmcblk0}} and partitions will have suffixes {{c|p1}}, {{c|p2}}, etc.

Revision as of 22:08, October 10, 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Install/Prepare Disk)
Make sure you will not be overwriting any important data and that you have chosen the correct {{c|/dev/sd?}} device. Above, you can see that SATA disk {{c|sda}} contains three partitions, {{c|sda1}}, {{c|sda2}} and {{c|sda3}}, and that {{c|sda3}} contains LVM volumes. If you are using an NVME disk, then you may see {{c|nvme0n1}} as your disk, and your partitions (if any exist yet) will be named {{c|nvme0n1p1}}, {{c|nvme0n1p2}}, etc. If you are installing on microSD Card for Raspberry Pi, your disk will likely be {{c|mmcblk0}} and partitions will have suffixes {{c|p1}}, {{c|p2}}, etc.

Make sure you will not be overwriting any important data and that you have chosen the correct /dev/sd? device. Above, you can see that SATA disk sda contains three partitions, sda1, sda2 and sda3, and that sda3 contains LVM volumes. If you are using an NVME disk, then you may see nvem0n1 as your disk, and your partitions (if any exist yet) will be named nvme0n1p1, nvme0n1p2, etc. If you are installing on microSD Card for Raspberry Pi, your disk will likely be mmcblk0 and partitions will have suffixes p1, p2, etc.

Retrieved from "https://www.funtoo.org/index.php?title=Translations:Install/Prepare_Disk/28/en&oldid=29506"