注意：

The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.

Difference between revisions of "User:Pnoecker/clfs"

From Funtoo
Jump to navigation Jump to search
Line 453: Line 453:
$##i## ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
$##i## ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
$##i## cd .. && rm -rf gawk-4.1.1
$##i## cd .. && rm -rf gawk-4.1.1
}}
===ch 6.20===
{{console|body=
$##i## tar -xf gettext-0.19.1.tar.gz && cd gettext-0.19.1
$##i## cd gettext-tools && echo "gl_cv_func_wcwidth_works=yes" > config.cache
$##i## ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --disable-shared --cache-file=config.cache && make -C gnulib-lib && make -C src msgfmt && cp -v src/msgfmt /tools/bin
$##i## cd ../.. && rm -rf gettext-0.19.1
}}
}}

Revision as of 20:02, February 11, 2022

this will overview my powerpc64 clfs progress on this page. http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/index.html

first export the clfs variable. this is my ~/sexybeast. 


user $ pwd
/home/pnoecker
user $ mkdir sexybeast
user $ export CLFS=/home/pnoecker/sexybeast
user $ sudo su
root # export CLFS=/home/pnoecker/sexybeast

follow from http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/materials/introduction.html 

user $ mkdir -v ${CLFS}/sources
user $ chmod -v a+wt ${CLFS}/sources
user $ wget http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/dl.list

dl.list has a broken isl link. use nano ctl + w : isl to find the link. replace it with this live link. http://ftp.osuosl.org/pub/clfs/conglomeration/isl/isl-0.12.2.tar.lzma then write the file and exit out of nano.

  • download sources
user $ wget -i dl.list -P ${CLFS}/sources

follow on from http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/final-preps/creatingtoolsdir.html

igore root, were doing this cash money $$$$ on the first command. second command requires root. 

user $ install -dv ${CLFS}/tools
user $ sudo ln -sv ${CLFS}/tools /

create cross tool directory. 

user $ install -dv ${CLFS}/cross-tools
user $ sudo ln -sv ${CLFS}/cross-tools /

http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/final-preps/addinguser.html 

user $ sudo groupadd clfs
user $ sudo useradd -s /bin/bash -g clfs -d /home/clfs clfs
user $ sudo mkdir -pv /home/clfs
user $ sudo chown -v clfs:clfs /home/clfs
user $ sudo chown -v clfs ${CLFS}/tools
user $ sudo chown -v clfs ${CLFS}/cross-tools
user $ sudo chown -v clfs ${CLFS}/sources
user $ sudo su - clfs

setup environment: 

user $ cat > ~/.bash_profile << "EOF"
exec env -i HOME=${HOME} TERM=${TERM} PS1='\u:\w\$ ' /bin/bash
EOF
user $ cat > ~/.bashrc << "EOF"
set +h
umask 022
CLFS=/home/pnoecker/sexybeast
LC_ALL=POSIX
PATH=/cross-tools/bin:/bin:/usr/bin
export CLFS LC_ALL PATH
unset CFLAGS CXXFLAGS
EOF
user $source ~/.bash_profile

setup host and target variables.

http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/final-preps/variables.html 

user $ export CLFS_HOST=$(echo ${MACHTYPE} | sed -e 's/-[^-]*/-cross/')
user $ export CLFS_TARGET="powerpc64-unknown-linux-gnu"
user $ export BUILD64="-m64"
user $ cat >> ~/.bashrc << EOF
export CLFS_HOST="${CLFS_HOST}"
export CLFS_TARGET="${CLFS_TARGET}"
export BUILD64="${BUILD64}"
EOF

link the sources directory to your clfs ~ home work space: 

user $ ln -sv ${CLFS}/sources .

http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/cross-tools/introduction.html 

user $ tar -xf file-5.19.tar.gz && cd file-5.19

compile according to the page. http://www.clfs.org/view/CLFS-3.0.0-SYSVINIT/ppc64-64/cross-tools/file.html 

user $ ./configure --prefix=/cross-tools --disable-static && make && make install

once finished compiling, go back down a level and remove the source directory: 

user $ cd .. && rm -rf file-5.19

install the linux headers. ch 5.3 

user $ wget https://trac.clfs.org/export/a4a0c7f1cd78df350da9e28b1d8f496702356e0f/patches/patch-3.14.21.xz
user $ tar -xf linux-3.14.tar.xz && cd linux-3.14
user $ xzcat ../patch-3.14.21.xz | patch -Np1 -i -
user $ make mrproper
user $ make ARCH=powerpc headers_check
user $ make ARCH=powerpc INSTALL_HDR_PATH=/tools headers_install

ch 5.4 

user $ wget https://ftp.gnu.org/gnu/m4/m4-1.4.19.tar.xz
user $ tar -xf m4-1.4.19.tar.xz && cd m4-1.4.19
user $ ./configure --prefix=/cross-tools && make && make install

ch 5.5 

user $ wget https://ftp.gnu.org/gnu/ncurses/ncurses-6.3.tar.gz
user $ tar -xf ncurses-6.3.tar.gz && cd ncurses-6.3
user $ ./configure --prefix=/cross-tools --without-debug --without-shared && make -C include && make -C progs tic && install -v -m755 progs/tic /cross-tools/bin

ch 5.6

user $ tar -xf pkg-config-lite-0.28-1.tar.gz && cd pkg-config-lite-0.28-1
user $ ./configure --prefix=/cross-tools --host=${CLFS_TARGET} --with-pc-path=/tools/lib/pkgconfig:/tools/share/pkgconfig && make && make install
user $ cd .. && rm -rf pkg-config-lite-0.28-1

ch 5.7 this package suggests using make check, it's optional but it's good practice to ensure it's working. 

user $ wget https://ftp.gnu.org/gnu/gmp/gmp-6.2.1.tar.xz
user $ tar -xf gmp-6.2.1.tar.xz && cd gmp-6.2.1
user $ ./configure --prefix=/cross-tools --enable-cxx --disable-static && make && make install
user $ make check
user $ cd .. && rm -rf gmp-6.2.1

ch 5.8

user $ tar -xf mpfr-3.1.2.tar.xz && cd mpfr-3.1.2
user $ patch -Np1 -i ../mpfr-3.1.2-fixes-4.patch
user $ LDFLAGS="-Wl,-rpath,/cross-tools/lib" ./configure --prefix=/cross-tools --disable-static --with-gmp=/cross-tools && make && make install
user $ cd .. && rm -rf mpfr-3.1.2

ch 5.9 

user $ wget https://ftp.gnu.org/gnu/mpc/mpc-1.0.2.tar.gz
user $ tar -xf mpc-1.0.2.tar.gz && cd mpc-1.0.2
user $ LDFLAGS="-Wl,-rpath,/cross-tools/lib" ./configure --prefix=/cross-tools --disable-static --with-gmp=/cross-tools --with-mpfr=/cross-tools && make && make install
user $ cd .. && rm -rf mpc-1.0.2

ch 5.10

this needs to be updated to isl 0.15 or 16 for gcc 8 series later on. 

user $ tar -xf isl-0.12.2.tar.lzma && cd isl-0.12.2
user $ LDFLAGS="-Wl,-rpath,/cross-tools/lib" ./configure --prefix=/cross-tools --disable-static     --with-gmp-prefix=/cross-tools && make && make install
user $ cd .. && rm -rf isl-0.12.2

ch 5.11

user $ wget http://www.bastoul.net/cloog/pages/download/cloog-0.18.4.tar.gz
user $ tar -xf cloog-0.18.4.tar.gz && cd cloog-0.18.4
user $ LDFLAGS="-Wl,-rpath,/cross-tools/lib" ./configure --prefix=/cross-tools --disable-static --with-gmp-prefix=/cross-tools --with-isl-prefix=/cross-tools
user $ cp -v Makefile{,.orig} && sed '/cmake/d' Makefile.orig > Makefile && make && make install
user $ cd .. && rm -rf cloog-0.18.2

ch 5.12

bin utils needs to be built in an external directory. 

user $ wget https://mirrors.sarata.com/gnu/binutils/binutils-2.36.tar.xz
user $ tar -xf binutils-2.36.tar.xz && cd binutils-2.36
user $ mkdir -v ../binutils-build && cd ../binutils-build
user $ AR=ar AS=as ../binutils-2.36/configure     --prefix=/cross-tools --host=${CLFS_HOST} --target=${CLFS_TARGET}     --with-sysroot=${CLFS} --with-lib-path=/tools/lib --disable-nls     --disable-static --enable-64-bit-bfd --disable-multilib --disable-werror && make && make install
user $ cd .. && rm -rf binutils-build && rm -rf binutils-2.36

ch 5.13

gcc static: 

user $ tar -xf gcc-8.1.0.tar.bz2 && cd gcc-8.1.0
user $ echo -en '\n#undef STANDARD_STARTFILE_PREFIX_1\n#define STANDARD_STARTFILE_PREFIX_1 "/tools/lib/"\n' >> gcc/config/rs6000/sysv4.h && echo -en '\n#undef STANDARD_STARTFILE_PREFIX_2\n#define STANDARD_STARTFILE_PREFIX_2 ""\n' >> gcc/config/rs6000/sysv4.h
user $ touch /tools/include/limits.h && mkdir -v ../gcc-build && cd ../gcc-build
user $ AR=ar LDFLAGS="-Wl,-rpath,/cross-tools/lib" \
    ../gcc-8.1.0/configure --prefix=/cross-tools \
    --build=${CLFS_HOST} --host=${CLFS_HOST} --target=${CLFS_TARGET} \
    --with-sysroot=${CLFS} --with-local-prefix=/tools \
    --with-native-system-header-dir=/tools/include --disable-nls \
    --disable-shared --with-mpfr=/cross-tools --with-gmp=/cross-tools \
    --with-isl=/cross-tools --with-cloog=/cross-tools --with-mpc=/cross-tools \
    --without-headers --with-newlib --disable-decimal-float --disable-libgomp \
    --disable-libmudflap --disable-libssp --disable-libatomic --disable-libitm \
    --disable-libsanitizer --disable-libquadmath --disable-threads \
    --disable-multilib --disable-target-zlib --with-system-zlib \
    --enable-languages=c --enable-checking=release
user $ make all-gcc all-target-libgcc && make install-gcc install-target-libgcc
user $ cd .. && rm -rf gcc-8.1.0 && rm -rf gcc-build

ch 5.14

glib c 

user $ tar -xf glibc-2.19.tar.xz && cd glibc-2.19
user $ cp -v timezone/Makefile{,.orig} && sed 's/\\$$(pwd)/`pwd`/' timezone/Makefile.orig > timezone/Makefile
user $ mkdir -v ../glibc-build && cd ../glibc-build
user $ echo "libc_cv_ssp=no" > config.cache
user $ BUILD_CC="gcc" CC="${CLFS_TARGET}-gcc ${BUILD64}" \
      AR="${CLFS_TARGET}-ar" RANLIB="${CLFS_TARGET}-ranlib" \
      ../glibc-2.19/configure --prefix=/tools \
      --host=${CLFS_TARGET} --build=${CLFS_HOST} \
      --disable-profile --enable-kernel=2.6.32 \
      --with-binutils=/cross-tools/bin --with-headers=/tools/include \
      --enable-obsolete-rpc --cache-file=config.cache && make && make install
user $ cd .. && rm -rf glibc-build && rm -rf glibc-2.19

ch 5.15

gcc final pass 

user $ tar -xf gcc-8.1.0.tar.xz && cd gcc-8.1.0
user $ echo -en '\n#undef STANDARD_STARTFILE_PREFIX_1\n#define STANDARD_STARTFILE_PREFIX_1 "/tools/lib/"\n' >> gcc/config/rs6000/sysv4.h && echo -en '\n#undef STANDARD_STARTFILE_PREFIX_2\n#define STANDARD_STARTFILE_PREFIX_2 ""\n' >> gcc/config/rs6000/sysv4.h
user $ mkdir -v ../gcc-build && cd ../gcc-build
user $ AR=ar LDFLAGS="-Wl,-rpath,/cross-tools/lib" \
    ../gcc-8.1.0/configure --prefix=/cross-tools \
    --build=${CLFS_HOST} --target=${CLFS_TARGET} --host=${CLFS_HOST} \
    --with-sysroot=${CLFS} --with-local-prefix=/tools \
    --with-native-system-header-dir=/tools/include --disable-nls \
    --disable-static --enable-languages=c,c++ --enable-__cxa_atexit \
    --enable-threads=posix --disable-multilib \
    --with-mpc=/cross-tools --with-mpfr=/cross-tools --with-gmp=/cross-tools \
    --with-cloog=/cross-tools --with-isl=/cross-tools --with-system-zlib \
    --enable-checking=release --enable-libstdcxx-time
user $ make AS_FOR_TARGET="${CLFS_TARGET}-as" LD_FOR_TARGET="${CLFS_TARGET}-ld" && make install
user $ cd .. && rm -rf gcc-build && rm -rf gcc-8.1.0

ch 6

ch 6.2 

export CC="${CLFS_TARGET}-gcc ${BUILD64}"
export CXX="${CLFS_TARGET}-g++ ${BUILD64}"
export AR="${CLFS_TARGET}-ar"
export AS="${CLFS_TARGET}-as"
export RANLIB="${CLFS_TARGET}-ranlib"
export LD="${CLFS_TARGET}-ld"
export STRIP="${CLFS_TARGET}-strip"
echo export CC=\""${CC}\"" >> ~/.bashrc
echo export CXX=\""${CXX}\"" >> ~/.bashrc
echo export AR=\""${AR}\"" >> ~/.bashrc
echo export AS=\""${AS}\"" >> ~/.bashrc
echo export RANLIB=\""${RANLIB}\"" >> ~/.bashrc
echo export LD=\""${LD}\"" >> ~/.bashrc
echo export STRIP=\""${STRIP}\"" >> ~/.bashrc

ch 6.3

user $ tar -xf gmp-6.2.1.tar.xz && cd gmp-6.2.1
user $ CC_FOR_BUILD=gcc ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --enable-cxx && make && make install
user $ cd .. && rm -rf gmp-6.2.1

ch 6.4

user $ tar -xf mpfr-3.1.2.tar.xz && cd mpfr-3.1.2
user $ patch -Np1 -i ../mpfr-3.1.2-fixes-4.patch
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf mpfr-3.1.2

ch 6.5

user $ tar -xf mpc-1.0.2.tar.gz && cd mpc-1.0.2
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf mpc-1.0.2

ch 6.6

user $ tar -xf isl-0.16.1.tar.bz2 && cd isl-0.16.1
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf isl-0.16.1

ch 6.7

user $ tar -xf cloog-0.18.4.tar.gz && cd cloog-0.18.4
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --with-isl=system && cp -v Makefile{,.orig} && sed '/cmake/d' Makefile.orig > Makefile && make && make install
user $ cd .. && rm -rf cloog-0.18.4

ch 6.8

user $ wget https://zlib.net/zlib-1.2.11.tar.xz
user $ tar -xf zlib-1.2.11.tar.xz && cd zlib-1.2.11
user $ ./configure --prefix=/tools && make && make install
user $ cd .. && rm -rf zlib-1.2.11

ch 6.9

user $ wget https://mirrors.sarata.com/gnu/binutils/binutils-2.36.tar.xz
user $ tar -xf binutils-2.36.tar.bz2 && cd binutils-2.36
user $ mkdir -v ../binutils-build && cd ../binutils-build
user $ ../binutils-2.36/configure \
    --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} \
    --target=${CLFS_TARGET} --with-lib-path=/tools/lib --disable-nls \
    --enable-shared --enable-64-bit-bfd --disable-multilib && make && make install
user $ cd .. && rm -rf binutils-build && rm -rf binutils-2.36

ch 6.10

user $ tar -xf gcc-8.1.0.tar.xz && cd gcc-8.1.0
user $ echo -en '\n#undef STANDARD_STARTFILE_PREFIX_1\n#define STANDARD_STARTFILE_PREFIX_1 "/tools/lib/"\n' >> gcc/config/rs6000/sysv4.h && echo -en '\n#undef STANDARD_STARTFILE_PREFIX_2\n#define STANDARD_STARTFILE_PREFIX_2 ""\n' >> gcc/config/rs6000/sysv4.h
user $ cp -v gcc/Makefile.in{,.orig} && sed 's@\./fixinc\.sh@-c true@' gcc/Makefile.in.orig > gcc/Makefile.in
user $ mkdir -v ../gcc-build && cd ../gcc-build
user $ ../gcc-8.1.0/configure --prefix=/tools --disable-multilib \
    --build=${CLFS_HOST} --host=${CLFS_TARGET} --target=${CLFS_TARGET} \
    --with-local-prefix=/tools --disable-nls --enable-languages=c,c++ \
    --disable-libstdcxx-pch \
    --with-native-system-header-dir=/tools/include --enable-checking=release \
    --enable-libstdcxx-time
user $ cp -v Makefile{,.orig} && sed "/^HOST_\(GMP\|ISL\|CLOOG\)\(LIBS\|INC\)/s:/tools:/cross-tools:g" \
    Makefile.orig > Makefile
user $ make AS_FOR_TARGET="${AS}" LD_FOR_TARGET="${LD}"
user $ make install && cp -v ../gcc-8.1.0/include/libiberty.h /tools/include
user $ cd .. && rm -rf gcc-build && rm -rf gcc-8.1.0

ch 6.11

user $ tar -xf ncurses-6.3.tar.gz && cd ncurses-6.3
user $ ./configure --prefix=/tools --with-shared --build=${CLFS_HOST} --host=${CLFS_TARGET}     --without-debug --without-ada --enable-overwrite --with-build-cc=gcc --disable-stripping && make && make install
user $ cd .. && rm -rf ncurses-6.3

ch 6.12

user $ tar -xf bash-4.3.tar.gz && cd bash-4.3
user $ patch -Np1 -i ../bash-4.3-branch_update-5.patch
user $ cat > config.cache << "EOF"
ac_cv_func_mmap_fixed_mapped=yes
ac_cv_func_strcoll_works=yes
ac_cv_func_working_mktime=yes
bash_cv_func_sigsetjmp=present
bash_cv_getcwd_malloc=yes
bash_cv_job_control_missing=present
bash_cv_printf_a_format=yes
bash_cv_sys_named_pipes=present
bash_cv_ulimit_maxfds=yes
bash_cv_under_sys_siglist=yes
bash_cv_unusable_rtsigs=no
gt_cv_int_divbyzero_sigfpe=yes
EOF
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --without-bash-malloc --cache-file=config.cache && make && make install
user $ cd .. && rm -rf bash-4.3

ch 6.13

user $ tar -xf bzip2-1.0.6.tar.gz && cd bzip2-1.0.6
user $ cp -v Makefile{,.orig} && sed -e 's@^\(all:.*\) test@\1@g' Makefile.orig > Makefile
user $ make CC="${CC}" AR="${AR}" RANLIB="${RANLIB}" && make PREFIX=/tools install
user $ cd .. && rm -rf bzip2-1.0.6

ch 6.14

user $ tar -xf check-0.9.13.tar.gz && cd check-0.9.13
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf check-0.9.13

ch 6.15

user $ tar -xf coreutils-8.22.tar.xz && cd coreutils-8.22
user $ cat > config.cache << EOF
fu_cv_sys_stat_statfs2_bsize=yes
gl_cv_func_working_mkstemp=yes
EOF
user $ patch -Np1 -i ../coreutils-8.22-noman-1.patch
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --enable-install-program=hostname --cache-file=config.cache && make && make install
user $ cd .. && rm -rf coreutils-8.22

ch 6.16

user $ tar -xf diffutils-3.3.tar.xz && cd diffutils-3.3
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf diffutils-3.3

ch 6.17

user $ tar -xf file-5.19.tar.gz && cd file-5.19
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf file-5.19

ch 6.18

user $ tar -xf findutils-4.4.2.tar.gz && cd findutils-4.4.2
user $ echo "gl_cv_func_wcwidth_works=yes" > config.cache && echo "ac_cv_func_fnmatch_gnu=yes" >> config.cache
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --cache-file=config.cache && make && make install
user $ cd .. && rm -rf findutils-4.4.2

ch 6.19

user $ tar -xf gawk-4.1.1.tar.xz && cd gawk-4.1.1
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} && make && make install
user $ cd .. && rm -rf gawk-4.1.1

ch 6.20

user $ tar -xf gettext-0.19.1.tar.gz && cd gettext-0.19.1
user $ cd gettext-tools && echo "gl_cv_func_wcwidth_works=yes" > config.cache
user $ ./configure --prefix=/tools --build=${CLFS_HOST} --host=${CLFS_TARGET} --disable-shared --cache-file=config.cache && make -C gnulib-lib && make -C src msgfmt && cp -v src/msgfmt /tools/bin
user $ cd ../.. && rm -rf gettext-0.19.1
Retrieved from "https://www.funtoo.org/index.php?title=User:Pnoecker/clfs&oldid=38888"