注意：

The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.

Difference between revisions of "Release Notes/1.3-release"

From Funtoo
Jump to navigation Jump to search
Line 70: Line 70:
==== {{c|xorg-server}} ====
==== {{c|xorg-server}} ====
   
   
{{c|suid}} USE is now disabled by default in {{c|xorg-server}}, partially in response to [https://www.mail-archive.com/xorg-announce@lists.x.org/msg01138.html CVE-2018-14665] and to follow upstream X.org recommended best practice. You will likely need to enable {{c|suid}} for X to start correctly if you are ''not'' using a display manager like {{c|gdm}} or {{c|xdm}}, and instead starting X directly using {{c|xinit}} or {{c|startx}}, . This can be done by adding the following line to {{f|/etc/portage/package.use}}, and re-emerging if necessary:
{{c|suid}} USE is now disabled by default in {{c|xorg-server}}, partially in response to [https://www.mail-archive.com/xorg-announce@lists.x.org/msg01138.html CVE-2018-14665] and to follow upstream X.org recommended best practice. You will likely need to enable {{c|suid}} for X to start correctly if you are ''not'' using a display manager like {{c|gdm}} or {{c|xdm}}, and instead starting X directly using {{c|xinit}} or {{c|startx}}. This can be done by adding the following line to {{f|/etc/portage/package.use}}, and re-emerging if necessary:


{{file|name=/etc/portage/package.use|body=
{{file|name=/etc/portage/package.use|body=

Revision as of 17:07, January 7, 2019

Upgrading

We recommend a clean install of Funtoo Linux 1.3 rather than an upgrade if possible. To upgrade existing Funtoo Linux 1.2 systems, please see Funtoo Linux 1.3 upgrade instructions.

Important Changes

There have been several important changes to the Funtoo Linux release process, builds and packages that we will cover below.

Kit Snapshots

The kits in meta-repo are based on a 13 November 2018 snapshot of Gentoo Linux. Unlike Funtoo Linux 1.2, all kits are frozen and 1.3 will serve as a "long term stable" (LTS) release of Funtoo Linux. This differs from the 1.2 release of Funtoo Linux where some kits were frozen, and others were not. We moved to a fully-snapshotted kit model to prevent unpredictable dependency breakage due to upstream changes that would apply to some kits but not others, which was an ongoing problem with the 1.2 release.

   Important

Funtoo Linux will continue to follow a "snapshot" true release process so that we can focus our efforts on developing new features for Funtoo. Our release goal is to provide (at the very minimum) 4 releases per year, and backport critical security fixes into our LTS release. Work on our next release will begin immediately and will be based on a snapshot of Gentoo Linux from early 2019.

Behind the scenes, there have been very significant improvements to our kits technology which will make it possible to accelerate our release cycle.

Deprecation of multilib Support

Multilib support -- the ability for 64-bit versions of Funtoo Linux to run legacy 32-bit applications -- has been deprecated, so that Funtoo Linux for 64-bit CPUs is now 64-bit only -- what we used to offer as a separate "pure64" build. This was done because 32-bit support was originally created as a stop-gap measure 15 years ago to allow for a seamless transition to 64-bit computing, and we believe the time has come to shed this ongoing maintenance burden and focus efforts that have historically been spent on 32-bit compatibility in other areas.

We realize that this may create inconvenience for some users. There are some workarounds that will work for most situations. One is to create a 32-bit chroot environment for the odd 32-bit application that you may still need to run.

   Important

We will be offering more advanced solutions in the future. For applications such as the popular Steam, we are developing a container-based solution with GPU passthrough -- essentially a "chroot on steroids" -- that will allow you to deploy Steam in a container. We welcome the challenge to deliver this solution to Funtoo users as the efforts we are spending on container GPU acceleration are more beneficial to the larger Funtoo community than continuing to maintain multilib. We are making good progress here (Thanks Pavol Cupka (palica)!) and expect to have robust support for legacy apps like Steam soon. We appreciate your patience while we work on getting this ready!

Move to LTS Kernel

Historically, we have bundled a prebuilt debian-sources kernel and initramfs in our stage3 tarballs to make it easier for users to install Funtoo. We are now pre-building debian-sources-lts 4.9.130-1. This is a 'long term stable' kernel which allows us to offer more compatibility with things like nvidia-drivers and virtualbox. It is also a production-ready kernel by default. We still provide official support for debian-sources, which is available for installation via ebuild, and will install as a pre-built universal kernel+initramfs if you set the binary USE flag.

   Warning

Please note that if you are not using debian-sources or debian-sources-lts, we assume you're an expert user and can take full responsibility for building and running your kernel of choice. While we allow you to run any kernel with Funtoo Linux, the only ones we officially provide support for are debian-sources and debian-sources-lts. This is because these are the kernels that we use ourselves, and test in both production and desktop/workstation environments.

Funtoo Linux 1.3 Improvements

Besides the important changes detailed above, there are a host of other improvements in Funtoo Linux 1.3, detailed below:

Core System

  • gcc updated to 7.4.1. Many thanks to Chris Giorgi (TemptorSent) for these udpates! This rewritten gcc ebuild also has major improvements such as crossdev support. (See FL-3787.)
  • binutils updated to 2.31.1
  • glibc updated to version 2.27.
  • gcc-config updated to version 2.0.
  • ego-2.7.2 includes many bug fixes. boot-update, Funtoo's official boot loader tool, has now been fully integrated into ego as ego boot.
  • openrc updated to version 0.40.2.
  • perl updated to version 5.26.
  • lxd updated to 3.6.

AWS (Amazon Web Services) Support

Official Funtoo Linux AWS images are now available in the AWS Marketplace (and will be updated to 1.3 soon!) See:

Funtoo Linux in the AWS Marketplace

Instructions for deploying Funtoo Linux AWS images can be found on our Amazon EC2 Launch page.

Kits system changes

The following kits have been created:

  • core-server-kit, for key LAMP applications typically used in a server environment.
  • core-ui-kit, for core UI frameworks.
  • core-gl-kit, for OpenGL/Mesa and core X11 protocols (Again, thanks goes to Chris Giorgi for these efforts!)

Database Improvements

Funtoo Linux now offers official Oracle mysql-community 8 ebuilds. The Oracle ebuilds provide a compelling alternative to mariadb for production database deployments.

Desktop Improvements

xorg-server

suid USE is now disabled by default in xorg-server, partially in response to CVE-2018-14665 and to follow upstream X.org recommended best practice. You will likely need to enable suid for X to start correctly if you are not using a display manager like gdm or xdm, and instead starting X directly using xinit or startx. This can be done by adding the following line to /etc/portage/package.use, and re-emerging if necessary:

   /etc/portage/package.use 
x11-base/xorg-server suid

Kit Improvements

Shotcut video editor

The following improvements have been made to desktop kits:

  • xorg-kit is now fully forked from Gentoo, and is based around xorg-server 1.20.
  • gnome-kit is fully forked from Gentoo and now offers a reliable GNOME 3.30 experience without systemd. See GNOME First Steps for information on how to set up.
  • Wayland support has been integrated into Funtoo Linux and is available via the wayland mix-in, and is enabled for kde-plasma-5 by default (see below.)
  • kde-kit now delivers an updated KDE Plasma 5 (5.4.13) experience that, like GNOME 3.30, uses elogind but not systemd.
  • xfce-kit now delivers a fully-tested XFCE 4.13.
  • gfxcard-nvidia mix-in created for easy one-step setup of systems with NVIDIA cards for use with proprietary NVIDIA drivers. nvidia-drivers now has uvm is enabled by default.
  • Video editing improvements: media-libs/mlt, media-video/shotcut new media-video/flowblade ebuild added.
   Note

It is now possible to enable both gnome and kde-plasma-5 profiles and have a system that runs both systemd-less GNOME and KDE Plasma. The KDE Plasma profile is currently based on the GNOME profile to ensure compatibility so KDE Plasma-only users will (for now) notice quite a bit of GNOME-related USE flags being enabled. This will be addressed in future releases.

Web Site Improvements

  • New Funtoo Linux MediaWiki theme.
  • New even more simplified Installation Guide with a tutorial-style page-by-page navigation style.
  • Addition of the Funtoo CPU Database with real-time search capability.
  • Totally redesigned FAQ section that allows users to submit their own FAQ questions.
  • Upgrades made to bug tracker and forums.

Security fixes

There have been numerous security fixes in Funtoo Linux 1.3, with a few notable fixes mentioned below:

Retrieved from "https://www.funtoo.org/index.php?title=Release_Notes/1.3-release&oldid=26542"