The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.
LXD
LXD is a container "hypervisor" it should provide user with a new and fresh experience using LXC technology.
LXD consists of three components:
- A system-wide daemon (lxd)
- A command line client (lxc)
- An OpenStack Nova plugin (nova-compute-lxd)
A REST API that is accesible both locally and if enabled, over the network is provided from the lxd daemon.
The command line tool is designed to be a very simple, yet very powerful tool to manage all your containers. It can handle connections to multiple container hosts and easily give you an overview of all the containers on your network, let you create some more where you want them and even move them around while they're running.
The OpenStack plugin then allows you to use your lxd hosts as compute nodes, running workloads on containers rather than virtual machines.
The LXD project was founded and is currently led by Canonical Ltd and Ubuntu with contributions from a range of other companies and individual contributors.
Features
Some of the biggest features of LXD are:
- Secure by design (unprivileged containers, resource restrictions and much more)
- Scalable (from containers on your laptop to thousand of compute nodes)
- Intuitive (simple, clear API and crisp command line experience)
- Image based (no more distribution templates, only good, trusted images)
- Live migration
Relationship with LXC
LXD isn't a rewrite of LXC, in fact it's building on top of LXC to provide a new, better user experience. Under the hood, LXD uses LXC through liblxc and its Go binding to create and manage the containers.
It's basically an alternative to LXC's tools and distribution template system with the added features that come from being controllable over the network.
Licensing
LXD is free software and is developed under the Apache 2 license.
Installing LXD in Funtoo
Kernel pre-requisities
These options should be enable in your kernel to use all of the functions of LXD:
!GRKERNSEC_CHROOT_CAPS
!GRKERNSEC_CHROOT_CHMOD
!GRKERNSEC_CHROOT_DOUBLE
!GRKERNSEC_CHROOT_MOUNT
!GRKERNSEC_CHROOT_PIVOT
!GRKERNSEC_PROC
!GRKERNSEC_SYSFS_RESTRICT
!NETPRIO_CGROUP
BRIDGE
CGROUP_CPUACCT
CGROUP_DEVICE
CGROUP_FREEZER
CGROUP_SCHED
CGROUPS
CHECKPOINT_RESTORE
CPUSETS
DEVPTS_MULTIPLE_INSTANCES
DUMMY
EPOLL
EVENTFD
FHANDLE
IA32_EMULATION
INET_DIAG
INET_TCP_DIAG
INET_UDP_DIAG
INOTIFY_USER
IP_NF_NAT
IP_NF_TARGET_MASQUERADE
IP6_NF_NAT
IP6_NF_TARGET_MASQUERADE
IPC_NS
IPV6
MACVLAN
NAMESPACES
NET_IPGRE
NET_IPGRE_DEMUX
NET_IPIP
NET_NS
NETFILTER_XT_MATCH_COMMENT
NETLINK_DIAG
NF_NAT_MASQUERADE_IPV4
NF_NAT_MASQUERADE_IPV6
PACKET_DIAG
PID_NS
POSIX_MQUEUE
UNIX_DIAG
USER_NS
UTS_NS
VETH
VXLAN
Getting LXD
Installing LXD is pretty straight forward as the ebuild exists in our portage tree. I would recommend putting /var on btrfs or zfs (or at least /var/lib/lxd) as LXD can take advantage of these COW filesytems. LXD doesn’t need any configuration to use btrfs, you just need to make sure that /var/lib/lxd is stored on a btrfs filesystem and LXD will automatically make use of it for you.
root # emerge -av lxd These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild N ] dev-lang/go-1.8-r1:0/1.8::gentoo USE="-gccgo" 69,062 KiB [ebuild N ] dev-go/go-crypto-0_pre20160126:0/0_pre20160126::gentoo 881 KiB [ebuild N ] sys-fs/squashfs-tools-4.3-r2::gentoo USE="xattr xz -debug -lz4 -lzma -lzo -static" 194 KiB [ebuild N ] sys-libs/libseccomp-2.3.2::gentoo USE="-static-libs" 547 KiB [ebuild N ] net-libs/libnet-1.2_rc3-r1:1.1::gentoo USE="-doc -static-libs" 661 KiB [ebuild N ] dev-libs/libnl-3.3.0_rc1:3::gentoo USE="python -static-libs -utils" PYTHON_TARGETS="python2_7 python3_4 -python3_5" 912 KiB [ebuild N ] dev-python/ipaddr-2.1.11-r1::gentoo PYTHON_TARGETS="python2_7 python3_4 -pypy -python3_5" 29 KiB [ebuild N ] dev-go/go-text-0_pre20160211:0/0_pre20160211::gentoo 3,922 KiB [ebuild N ] sys-libs/libcap-2.25::gentoo USE="pam -static-libs" 63 KiB [ebuild N ] dev-go/go-net-0_pre20160216:0/0_pre20160216::gentoo 724 KiB [ebuild N ] net-dns/dnsmasq-2.76-r1::gentoo USE="dhcp inotify ipv6 nls -auth-dns -conntrack -dbus -dhcp-tools -dnssec -idn -lua -script (-selinux) -static -tftp" LINGUAS="-de -es -fi -fr -id -it -no -pl -pt_BR -ro" 470 KiB [ebuild N ] dev-libs/protobuf-c-1.2.1-r1:0/1.0.0::gentoo USE="-static-libs {-test}" 448 KiB [ebuild N ] sys-process/criu-2.12::gentoo USE="python -setproctitle" PYTHON_TARGETS="python2_7" 632 KiB [ebuild N ] app-emulation/lxc-2.0.7::gentoo USE="python seccomp -cgmanager -doc -examples -lua" PYTHON_TARGETS="python3_4 -python3_5" 774 KiB [ebuild N ] app-emulation/lxd-2.11::gentoo USE="daemon nls {-test}" LINGUAS="-de -el -fr -ja -nl -ru" 2,352 KiB Total: 15 packages (15 new), Size of downloads: 81,664 KiB Would you like to add these changes to your config files? [Yes/No]
Running LXD
Once installed you need to start the LXD daemon. By running:
root # service lxd start * Starting lxd server ...
First setup of LXD/Initialisation
Before using LXD for the first time as a user, you may initialize your LXD environment. As recommended earlier I am using btrfs for this installation.
user $ lxd init Do you want to configure a new storage pool (yes/no) [default=yes]? Name of the new storage pool [default=default]: Name of the storage backend to use (dir, btrfs, lvm) [default=dir]: btrfs Create a new BTRFS pool (yes/no) [default=yes]? Would you like to use an existing block device (yes/no) [default=no]? Would you like to create a new subvolume for the BTRFS storage pool (yes/no) [default=yes]: Would you like LXD to be available over the network (yes/no) [default=no]? Would you like stale cached images to be updated automatically (yes/no) [default=yes]? Would you like to create a new network bridge (yes/no) [default=yes]? What should the new bridge be called [default=lxdbr0]? What IPv4 address should be used (CIDR subnet notation, “auto” or “none”) [default=auto]? What IPv6 address should be used (CIDR subnet notation, “auto” or “none”) [default=auto]? LXD has been successfully configured.
What this does is it creates btrfs subvolumes like this:
user $ btrfs sub list . ID 260 gen 1047 top level 5 path rootfs ID 280 gen 1046 top level 260 path var/lib/lxd/storage-pools/default ID 281 gen 1043 top level 280 path var/lib/lxd/storage-pools/default/containers ID 282 gen 1044 top level 280 path var/lib/lxd/storage-pools/default/snapshots ID 283 gen 1045 top level 280 path var/lib/lxd/storage-pools/default/images ID 284 gen 1046 top level 280 path var/lib/lxd/storage-pools/default/custom
It also creates new network interface for you:
user $ ip a list dev lxdbr0 8: lxdbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether d2:9b:70:f2:8f:6f brd ff:ff:ff:ff:ff:ff inet 10.250.237.1/24 scope global lxdbr0 valid_lft forever preferred_lft forever inet 169.254.59.23/16 brd 169.254.255.255 scope global lxdbr0 valid_lft forever preferred_lft forever inet6 fd42:efd8:662e:3184::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::caf5:b7ed:445e:b112/64 scope link valid_lft forever preferred_lft forever
And last but not least it also generates iptables rules for you:
user $ iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:domain /* generated for LXD network lxdbr0 */ ACCEPT udp -- anywhere anywhere udp dpt:domain /* generated for LXD network lxdbr0 */ ACCEPT udp -- anywhere anywhere udp dpt:bootps /* generated for LXD network lxdbr0 */ Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere /* generated for LXD network lxdbr0 */ ACCEPT all -- anywhere anywhere /* generated for LXD network lxdbr0 */ Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp spt:domain /* generated for LXD network lxdbr0 */ ACCEPT udp -- anywhere anywhere udp spt:domain /* generated for LXD network lxdbr0 */ ACCEPT udp -- anywhere anywhere udp spt:bootps /* generated for LXD network lxdbr0 */ user $ iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.250.237.0/24 !10.250.237.0/24 /* generated for LXD network lxdbr0 */ user $ iptables -L -t mangle Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination CHECKSUM udp -- anywhere anywhere udp dpt:bootpc /* generated for LXD network lxdbr0 */ CHECKSUM fill
Some other things done by the initialization and starting of the LXD daemon are:
- dnsmasq listening on lxdbr0
Finishing up the setup of LXD
There are still some things that you need to do manually. We need to setup subuid and subgid values for our containers to use. And for using non-systemd containers we will also need app-admin/cgmanager so emerge and start it now.
Containers, snapshots and images
Containers in LXD are made of:
- A filesystem (rootfs)
- A list of configuration options, including resource limits, environment, security options and more
- A bunch of devices like disks, character/block unix devices and network interfaces
- A set of profiles the container inherits configuration from (see below)
- Some properties (container architecture, ephemeral or persistent and the name)
- Some runtime state (when using CRIU for checkpoint/restore)
Container snapshots as the name states snapshots of the container in time and cannot be modified in any way. It is worth noting that because snapshots can store the container runtime state, which gives us ability of “stateful” snapshots. That is, the ability to rollback the container including its cpu and memory state at the time of the snapshot.
LXD is image based, all LXD containers come from an image. Images are typically clean Linux distribution images similar to what you would use for a virtual machine or cloud instance. It is possible to “publish” a container, making an image from it which can then be used by the local or remote LXD hosts.
Our first image
Let's get our hands even more dirty and create our first image. We will be using a generic 64 bit Funtoo Linux image. Let's grab it, because we will need to modify it a little bit.
Modifying the stage3 image
So the steps that follow will download, extract the stage3 to a directory, and modify etc/rc.conf changing rc_sys value to lxc and comment out consoles in etc/inittab.
root # mkdir lxd-images root # cd lxd-images root # wget http://build.funtoo.org/funtoo-current/pure64/generic_64-pure64/stage3-latest.tar.xz root # mkdir rootfs root # tar -xaf stage3-latest.tar.xz -C rootfs/ root # cd rootfs root # sed -i 's/^#rc_sys=""/rc_sys="lxc"/' etc/rc.conf root # sed -i '/^c[1-6]/s/^\(.*\)$/#\1/' etc/inittab
Metadata and templates
Now we will create metadata and templates that will be used by the image and later by containers.
root # cd .. root # mkdir templates root # echo hostname=\"{{ container.name }}\" > templates/hostname.tpl
Create a file named metadata.yaml in current directory (lxd-images) with this contents:
architecture: x86_64
creation_date: 20170907
properties:
architecture: x86_64
description: Funtoo Current Generic Pure 64-bit
name: funtoo-generic_64-pure64-funtoo-current-2016-12-10
os: funtoo
release: 1.0
variant: current
templates:
/etc/conf.d/hostname:
template: hostname.tpl
when:
- create
- copy
Prepare the archive
Now we recreate the archive and later use it to import into LXD.
root # tar -caf lxd-image.tar.xz metadata.yaml templates rootfs
Import the image
After we have successfully recreated our archive we can now finally import it into LXD and start using it as our "seed" image for all our containers.
root # lxc image import lxd-image.tar.xz --alias funtoo Image imported with fingerprint: 53eef950302606f30bc2e676e2ebfb6d6bea5783621dd4ad55069e00e7f3f512 root # lxc image ls +--------+--------------+--------+------------------------------------+--------+----------+-----------------------------+ | ALIAS | FINGERPRINT | PUBLIC | DESCRIPTION | ARCH | SIZE | UPLOAD DATE | +--------+--------------+--------+------------------------------------+--------+----------+-----------------------------+ | funtoo | 53eef9503026 | no | Funtoo Current Generic Pure 64-bit | x86_64 | 347.75MB | Sep 8, 2017 at 1:17am (UTC) | +--------+--------------+--------+------------------------------------+--------+----------+-----------------------------+
And there we have our very first Funtoo Linux image imported inside LXD. You can reference the image through the alias or through the fingerprint. Aliases can be added also later.
Let me show you some basic usage then.
Creating your first container
First we have to add some subuid and subgid values for lxd to use. Add these lines to your /etc/subuid and /etc/subgid files on the host.
root # nano -w /etc/subuid root:100000:65536 lxd:100000:65536 root # nano -w /etc/subgid root:100000:65536 lxd:100000:65536
This isolates the users inside the container and even if they would escape the container they would get nobody's privileges on the host.
So now we can init our first container. That is done using this command:
root # lxc init funtoo c1 Creating c1 root # lxc ls +------+---------+------+------+------------+-----------+ | NAME | STATE | IPV4 | IPV6 | TYPE | SNAPSHOTS | +------+---------+------+------+------------+-----------+ | c1 | STOPPED | | | PERSISTENT | 0 | +------+---------+------+------+------------+-----------+
Profiles intermezzo
LXD has the ability to change quite a few container settings, including resource limitation, control of container startup and a variety of device pass-through options using what is called profiles. Let me show you how can this be used.
This is the default profile that gets inherited by all containers.
root # lxc profile list +---------+---------+ | NAME | USED BY | +---------+---------+ | default | 1 | +---------+---------+ root # lxc profile show default config: {} description: Default LXD profile devices: eth0: nictype: bridged parent: lxdbr0 type: nic root: path: / pool: default type: disk name: default used_by: - /1.0/containers/c1
Now let's make a profile specific for our funtoo containers. It will include shared meta-repo and some other goodies.
root # lxc profile create prf-funtoo Profile prf-funtoo created root # lxc profile edit prf-funtoo root ### This is a yaml representation of the profile. root ### Any line starting with a '# will be ignored. root ### root ### A profile consists of a set of configuration items followed by a set of root ### devices. root ### root ### An example would look like: root ### name: onenic root ### config: root ### raw.lxc: lxc.aa_profile=unconfined root ### devices: root ### eth0: root ### nictype: bridged root ### parent: lxdbr0 root ### type: nic root ### root ### Note that the name is shown but cannot be changed config: raw.lxc: lxc.mount.auto = proc sys cgroup description: "LXD profile for Funtoo-based containers" devices: portage: path: var/git source: /var/git type: disk name: prf-funtoo used_by: []
root # lxc profile add c1 prf-funtoo Profile prf-funtoo added to c1
Starting our first container
After we have done all these customizations we can now start our container.
root # lxc start c1
And now we can gain shell inside our container.
root # lxc exec c1 bash
Now you should see a different prompt starting with c1 # .