The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.
Install/Stage3/en
This is a template that is used as part of the Installation instructions which covers: the process of installing the Stage3 tarball. Templates are being used to allow multiple variant install guides that use most of the same re-usable parts.
Setting the Date
If your system's date and time are too far off (typically by months or years,) then it may prevent Portage from properly downloading source tarballs. This is because some of our sources are downloaded via HTTPS, which use SSL certificates and are marked with an activation and expiration date. However, if your system time is relatively close to correct, you can probably skip this step for now.
Now is a good time to verify the date and time are correctly set to UTC. Use the date command to verify the date and time:
root # date Fri Jul 15 19:47:18 UTC 2011
If the date and/or time need to be corrected, do so using date MMDDhhmmYYYY, keeping in mind hhmm are in 24-hour format. The example below changes the date and time to "July 16th, 2011 @ 8:00PM" UTC:
root # date 071620002011 Fri Jul 16 20:00:00 UTC 2011
Once you have set the system clock, it's a very good idea to copy the time to the hardware clock, so it persists across reboots:
root # hwclock --systohc
Installing the Stage 3 tarball
Now that filesystems are created and your hardware and system clock are set, the next step is downloading the initial Stage 3 tarball. The Stage 3 is a pre-compiled system used as a starting point to install Funtoo Linux. Notice: if you're using virtual machines (like Vbox) generic stage3 images are preferred rather than cpu-optimized ones.
To download the correct build of Funtoo Linux for your system, head over to the Subarches page. Subarches are builds of Funtoo Linux that are designed to run on a particular type of CPU, to offer the best possible performance. They also take advantage of the instruction sets available for each CPU.
The Subarches page lists all CPU-optimized versions of Funtoo Linux. Find the one that is appropriate for the type of CPU that your system has, and then click on its name in the first column (such as corei7, for example.) You will then go to a page dedicated to that subarch, and the available stage3's available for download will be listed.
For most subarches, you will have several stage3's available to choose from. This next section will help you understand which one to pick.
Which Build?
If you're not sure, pick funtoo-current.
Funtoo Linux has various different 'builds':
| Build | Description |
|---|---|
funtoo-current | The most commonly-selected build of Funtoo Linux. Receives rapid updates and preferred by desktop users. |
funtoo-stable | Emphasizes less-frequent package updates and trusted, reliable versions of packages over the latest versions. |
Which Variant?
If you're not sure, pick standard.
Our "regular" stage3's are listed with a variant of standard. The following variant builds are available:
| Variant | Description |
|---|---|
standard | The "standard" version of Funtoo Linux |
pure64 | A 64-bit build that drops multilib (32-bit compatibility) support. Can be ideal for server systems. |
hardened | Includes PIE/SSP toolchain for enhanced security. PIE does require the use of PaX in the kernel, while SSP works with any kernel, and provides enhanced security in user-space to avoid stack-based exploits. For expert users. |
Download the Stage3
Once you have found the stage3 that you would like to download, use wget to download the Stage 3 tarball you have chosen to use as the basis for your new Funtoo Linux system. It should be saved to the /mnt/funtoo directory as follows:
root # cd /mnt/funtoo root # wget http://build.funtoo.org/funtoo-current/x86-64bit/generic_64/stage3-latest.tar.xz
Note that 64-bit systems can run 32-bit or 64-bit stages, but 32-bit systems can only run 32-bit stages. Make sure that you select a Stage 3 build that is appropriate for your CPU. If you are not certain, it is a safe bet to choose the generic_64 or generic_32 stage. Consult the Subarches page for more information.
Once the stage is downloaded, extract the contents with the following command, substituting in the actual name of your stage 3 tarball:
root # tar xpf stage3-latest.tar.xz
It is very important to use tar's "p" option when extracting the Stage 3 tarball - it tells tar to preserve any permissions and ownership that exist within the archive. Without this option, your Funtoo Linux filesystem permissions will be incorrect.