注意：

The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.

LXD

From Funtoo
Jump to navigation Jump to search

LXD is a container "hypervisor" it should provide user with a new and fresh experience using LXC technology. {{#layout:doc}}


LXD consists of three components:

  • A system-wide daemon (lxd)
  • A command line client (lxc)
  • An OpenStack Nova plugin (nova-compute-lxd)

A REST API that is accesible both locally and if enabled, over the network is provided from the lxd daemon.

The command line tool is designed to be a very simple, yet very powerful tool to manage all your containers. It can handle connections to multiple container hosts and easily give you an overview of all the containers on your network, let you create some more where you want them and even move them around while they're running.

The OpenStack plugin then allows you to use your lxd hosts as compute nodes, running workloads on containers rather than virtual machines.

The LXD project was founded and is currently led by Canonical Ltd and Ubuntu with contributions from a range of other companies and individual contributors.

Features

Some of the biggest features of LXD are:

  • Secure by design (unprivileged containers, resource restrictions and much more)
  • Scalable (from containers on your laptop to thousand of compute nodes)
  • Intuitive (simple, clear API and crisp command line experience)
  • Image based (no more distribution templates, only good, trusted images)
  • Live migration

Unprivileged Containers

LXD uses unprivileged containers by default. The difference between an unprivileged container and a privileged one is whether the root user in the container is the “real” root user (uid 0 at the kernel level).

The way unprivileged containers are created is by taking a set of normal UIDs and GIDs from the host, usually at least 65536 of each (to be POSIX compliant) and mapping those into the container.

The most common example and what most LXD users will end up with by default is a map of 65536 UIDs and GIDs, with a host base id of 100000. This means that root in the container (uid 0) will be mapped to the host uid 100000 and uid 65535 in the container will be mapped to uid 165535 on the host. UID/GID 65536 and higher in the container aren’t mapped and will return an error if you attempt to use them.

From a security point of view, that means that anything which is not owned by the users and groups mapped into the container will be inaccessible. Any such resource will show up as being owned by uid/gid “-1” (rendered as 65534 or nobody/nogroup in userspace). It also means that should there be a way to escape the container, even root in the container would find itself with just as much privileges on the host as a nobody user.

LXD does offer a number of options related to unprivileged configuration:

  • Increasing the size of the default uid/gid map
  • Setting up per-container maps
  • Punching holes into the map to expose host users and groups

Relationship with LXC

LXD isn't a rewrite of LXC, in fact it's building on top of LXC to provide a new, better user experience. Under the hood, LXD uses LXC through liblxc and its Go binding to create and manage the containers.

It's basically an alternative to LXC's tools and distribution template system with the added features that come from being controllable over the network.

Licensing

LXD is free software and is developed under the Apache 2 license.

Installing LXD in Funtoo

Kernel pre-requisities

These options should be disabled in your kernel to use all of the functions of LXD: 

 GRKERNSEC_CHROOT_CAPS
 GRKERNSEC_CHROOT_CHMOD
 GRKERNSEC_CHROOT_DOUBLE
 GRKERNSEC_CHROOT_MOUNT
 GRKERNSEC_CHROOT_PIVOT
 GRKERNSEC_PROC
 GRKERNSEC_SYSFS_RESTRICT
 NETPRIO_CGROUP

These options should be enabled in your kernel to use all of the functions of LXD: 

 BRIDGE
 CGROUP_CPUACCT
 CGROUP_DEVICE
 CGROUP_FREEZER
 CGROUP_SCHED
 CGROUPS
 CHECKPOINT_RESTORE
 CPUSETS
 DUMMY
 EPOLL 
 EVENTFD 
 FHANDLE 
 IA32_EMULATION 
 INET_DIAG 
 INET_TCP_DIAG
 INET_UDP_DIAG
 INOTIFY_USER
 IP_NF_NAT
 IP_NF_TARGET_MASQUERADE
 IP6_NF_NAT
 IP6_NF_TARGET_MASQUERADE
 IPC_NS
 IPV6
 MACVLAN
 NAMESPACES 
 NET_IPGRE
 NET_IPGRE_DEMUX
 NET_IPIP
 NET_NS
 NETFILTER_XT_MATCH_COMMENT
 NETLINK_DIAG
 NF_NAT_MASQUERADE_IPV4
 NF_NAT_MASQUERADE_IPV6
 PACKET_DIAG 
 PID_NS 
 POSIX_MQUEUE
 UNIX_DIAG
 USER_NS
 UTS_NS
 VETH
 VXLAN

   Note

The Funtoo's default kernel (sys-kernel/debian-sources – v. 4.11.11 at the time of writing) has all these options enabled.

   Tip

On older kernels DEVPTS_MULTIPLE_INSTANCES is needed too (as of kernel version 4.11.11 - the option doesn't exist any more)

LXC package comes with an utility to check all needed config options. 

root # CONFIG=/path/to/config /usr/bin/lxc-checkconfig

You can also use this code to compare your config settings with the ones needed. Put the required config options in a kernel-req.txt file and run the script.

   kerncheck.py (python source code) - check kernel options
import gzip

REQF = "kernel-req.txt"    # copy kernel options requirements into this file
REQS = set()
CFGS = set()

with open(REQF) as f:
    for line in f:
        REQS.add("CONFIG_%s" % line.strip())

with gzip.open("/proc/config.gz") as f:
    for line in f:
        line = line.decode().strip()
        if not line or line.startswith("#"):
            continue

        try:
            [opt, val] = line.split("=")
            if val =="n":
                continue
            CFGS.add(opt)
        except:
            pass

print("Enabled config options:")
print(CFGS & REQS)

print("Missing config options:")
print(REQS - CFGS)

Installing LXD

Installing LXD is pretty straight forward as the ebuild exists in our portage tree. I would recommend putting /var on btrfs or zfs (or at least /var/lib/lxd) as LXD can take advantage of these COW filesytems. LXD doesn’t need any configuration to use btrfs, you just need to make sure that /var/lib/lxd is stored on a btrfs filesystem and LXD will automatically make use of it for you. You can use any other filesystem, but be advised LXD can take great advantage of btrfs or ZFS, be it for snapshots, clones, quotas and more. If you want to test it on your current filesystem consider creating a loop device that you format with btrfs and use that as your /var/lib/lxd device.

There are couple of major versions of LXD/LXC.

  • LXC
    • LXC 1.0 (LXC upstream strongly recommends 1.0 users to upgrade to the 2.0 LTS release. Not supported by Funtoo.)
    • LXC 2.0.x LTS (supported until June 2021) - latest version 2.0.9
    • LXC 2.x (supported for a year from release announcement on 5th of September 2017 - so until September 2018) - latest version 2.1.1
  • LXD
    • LXD 2.0.x LTS (supported until June 2021) - latest 2.0.11
    • LXD 2.x - latest 2.21
  • LXCFS
    • LXCFS 2.0.x LTS (supported until June 2021) - latest 2.0.8
   Warning

LXD downgrade from "current" to "LTS" is not supported, but can still be done with lots of manual work.

Install LXD by: 

root # emerge -av lxd

First setup of LXD/Initialisation

Before using LXD for the first time as a user, you should initialize your LXD environment. As stated earlier btrfs (or zfs) is recommended as your storage filesystem. 

root # service lxd start
 * Starting lxd server ...
root # lxd init
Do you want to configure a new storage pool (yes/no) [default=yes]? yes
Name of the new storage pool [default=default]: default
Name of the storage backend to use (dir, btrfs, lvm) [default=dir]: btrfs
Create a new BTRFS pool (yes/no) [default=yes]? yes
Would you like to use an existing block device (yes/no) [default=no]? no
Would you like to create a new subvolume for the BTRFS storage pool (yes/no) [default=yes]: yes
Would you like LXD to be available over the network (yes/no) [default=no]? no
Would you like stale cached images to be updated automatically (yes/no) [default=yes]? no
Would you like to create a new network bridge (yes/no) [default=yes]? yes
What should the new bridge be called [default=lxdbr0]? lxdbr0
What IPv4 address should be used (CIDR subnet notation, “auto” or “none”) [default=auto]? auto
What IPv6 address should be used (CIDR subnet notation, “auto” or “none”) [default=auto]? auto
LXD has been successfully configured.

What this does is it creates btrfs subvolumes like this: 

user $ btrfs sub list .
ID 260 gen 1047 top level 5 path rootfs
ID 280 gen 1046 top level 260 path var/lib/lxd/storage-pools/default
ID 281 gen 1043 top level 280 path var/lib/lxd/storage-pools/default/containers
ID 282 gen 1044 top level 280 path var/lib/lxd/storage-pools/default/snapshots
ID 283 gen 1045 top level 280 path var/lib/lxd/storage-pools/default/images
ID 284 gen 1046 top level 280 path var/lib/lxd/storage-pools/default/custom

It also creates new network interface for you: 

user $ ip a list dev lxdbr0
8: lxdbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
    link/ether d2:9b:70:f2:8f:6f brd ff:ff:ff:ff:ff:ff
    inet 10.250.237.1/24 scope global lxdbr0
       valid_lft forever preferred_lft forever
    inet 169.254.59.23/16 brd 169.254.255.255 scope global lxdbr0
       valid_lft forever preferred_lft forever
    inet6 fd42:efd8:662e:3184::1/64 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::caf5:b7ed:445e:b112/64 scope link
       valid_lft forever preferred_lft forever

And last but not least it also generates iptables rules for you: 

user $ iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:domain /* generated for LXD network lxdbr0 */
ACCEPT     udp  --  anywhere             anywhere             udp dpt:domain /* generated for LXD network lxdbr0 */
ACCEPT     udp  --  anywhere             anywhere             udp dpt:bootps /* generated for LXD network lxdbr0 */

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
ACCEPT     all  --  anywhere             anywhere             /* generated for LXD network lxdbr0 */
ACCEPT     all  --  anywhere             anywhere             /* generated for LXD network lxdbr0 */

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     tcp  --  anywhere             anywhere             tcp spt:domain /* generated for LXD network lxdbr0 */
ACCEPT     udp  --  anywhere             anywhere             udp spt:domain /* generated for LXD network lxdbr0 */
ACCEPT     udp  --  anywhere             anywhere             udp spt:bootps /* generated for LXD network lxdbr0 */

user $ iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination

Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination
MASQUERADE  all  --  10.250.237.0/24     !10.250.237.0/24      /* generated for LXD network lxdbr0 */

user $ iptables -L -t mangle
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination

Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination
CHECKSUM   udp  --  anywhere             anywhere             udp dpt:bootpc /* generated for LXD network lxdbr0 */ CHECKSUM fill

Some other things done by the initialization and starting of the LXD daemon are:

  • dnsmasq listening on lxdbr0
  • ...

Finishing up the setup of LXD

   Note

Some good instruction for a production server can be found here.

There are still some things that you need to do manually. We need to setup subuid and subgid values for our containers to use. And for using non-systemd containers we will also need app-admin/cgmanager so emerge and start it now. 

root # rc-update add lxd default
root # rc-update add lxcfs default
root # usermod --add-subuids 100000-165535 root
root # usermod --add-subgids 100000-165535 root
root # service lxd restart
root # rc

LXD restart is needed to inform the daemon of the uid/gid changes.

Containers, snapshots and images

Containers in LXD are made of:

  • A filesystem (rootfs)
  • A list of configuration options, including resource limits, environment, security options and more
  • A bunch of devices like disks, character/block unix devices and network interfaces
  • A set of profiles the container inherits configuration from (see below)
  • Some properties (container architecture, ephemeral or persistent and the name)
  • Some runtime state (when using CRIU for checkpoint/restore)

Container snapshots as the name states snapshots of the container in time and cannot be modified in any way. It is worth noting that because snapshots can store the container runtime state, which gives us ability of “stateful” snapshots. That is, the ability to rollback the container including its cpu and memory state at the time of the snapshot.

LXD is image based, all LXD containers come from an image. Images are typically clean Linux distribution images similar to what you would use for a virtual machine or cloud instance. It is possible to “publish” a container, making an image from it which can then be used by the local or remote LXD hosts.

Our first image

Let's get our hands even more dirty and create our first image. We will be using a generic 64 bit Funtoo Linux image.

   Note

The Funtoo's default build host doesn't build LXD stages, yet.

Grab the image here (or pick the subarch that you want): http://build.liguros.net/funtoo-current/x86-64bit/generic_64/lxd-latest.tar.xz

Grab also the hash file: http://build.liguros.net/funtoo-current/x86-64bit/generic_64/lxd-latest.tar.xz.hash.txt

   Tip

Check the hash of the downloaded file against the one from server. Proceed if they match.

Import the image

After we have successfully downloaded the archive we can now finally import it into LXD and start using it as our "seed" image for all our containers. 

root # lxc image import lxd-latest.tar.xz --alias funtoo
Image imported with fingerprint: 6c2ca3af0222d503656f5a1838885f1b9b6aed2c1994f1d7ef94e2efcb7233c4
root # lxc image ls
+--------+--------------+--------+------------------------------------+--------+----------+-----------------------------+
| ALIAS  | FINGERPRINT  | PUBLIC |            DESCRIPTION             |  ARCH  |   SIZE   |         UPLOAD DATE         |
+--------+--------------+--------+------------------------------------+--------+----------+-----------------------------+
| funtoo | 6c2ca3af0222 | no     | Funtoo Current Generic Pure 64-bit | x86_64 |227.99MB  | Dec 13, 2017 at 11:01pm (UTC)  |
+--------+--------------+--------+------------------------------------+--------+----------+-----------------------------+

And there we have our very first Funtoo Linux image imported inside LXD. You can reference the image through the alias or through the fingerprint. Aliases can be added also later.

Let me show you some basic usage then.

Creating your first container

So now we can launch our first container. That is done using this command: 

root # lxc launch funtoo fun-1
Creating fun-1
Starting fun-1
root #  lxc ls
+-------+---------+------+-----------------------------------------------+------------+-----------+
| NAME  |  STATE  | IPV4 |                     IPV6                      |    TYPE    | SNAPSHOTS |
+-------+---------+------+-----------------------------------------------+------------+-----------+
| fun-1 | RUNNING |      | fd42:156d:4593:a619:216:3eff:fef7:c1c2 (eth0) | PERSISTENT | 0         |
+-------+---------+------+-----------------------------------------------+------------+-----------+
   Tip

lxc launch is a shortcut for lxc init and lxc start, lxc init creates the container without starting it.

Profiles intermezzo

LXD has the ability to change quite a few container settings, including resource limitation, control of container startup and a variety of device pass-through options using what is called profiles. Multiple profiles can be applied to a single container, and the last profile overrides the other ones it the resources being configured is the same for multiple profiles. Let me show you how can this be used.

This is the default profile that gets inherited by all containers. 

root # lxc profile list
+---------+---------+
|  NAME   | USED BY |
+---------+---------+
| default | 1       |
+---------+---------+

root #  lxc profile show default
config: {}
description: Default LXD profile
devices:
  eth0:
    nictype: bridged
    parent: lxdbr0
    type: nic
  root:
    path: /
    pool: default
    type: disk
name: default
used_by:
- /1.0/containers/fun-1

Now let's edit this profile for our funtoo containers. It will include some useful stuff. 

root # lxc profile set default raw.lxc "lxc.mount.entry = none dev/shm tmpfs rw,nosuid,nodev,create=dir"
root # lxc profile set default environment.LANG "en_US.UTF-8"
root # lxc profile set default environment.LC_ALL "en_US.UTF-8"
root # lxc profile set default environment.LC_COLLATE "POSIX"

Profiles can store any configuration that a container can (key/value or devices) and any number of profiles can be applied to a container. Profiles are applied in the order they are specified so the last profile to specify a specific key wins. In any case, resource-specific configuration always overrides that coming from the profiles.

The default profile is set for any new container created which doesn't specify a different profiles list.

   Note

LXD supports simple instance types. Those are represented as a string which can be passed at container creation time. containers.md#instance-types

Using our first container

After we have done all these customizations we can now start using our container. The next command will give us shell inside the container. 

root # lxc exec fun-1 bash

Now you should see a different prompt starting with 

fun-1 ~ #

If we run top or ps for example we will see only the processes of the container. 

fun-1 ~ # ps aux
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0   4248   748 ?        Ss+  13:20   0:00 init [3]
root       266  0.0  0.0  30488   472 ?        Ss   13:20   0:00 /usr/sbin/sshd
root       312  0.2  0.0  17996  3416 ?        Ss   13:29   0:00 bash
root       317  0.0  0.0  19200  2260 ?        R+   13:29   0:00 ps aux

As you can see only the container's processes are shown. User running the processes is root here. What happens if we search for all sshd processes for example on the host box? 

root # ps aux|grep ssh
root     14505  0.0  0.0  30564  1508 ?        Ss   Sep07   0:00 /usr/sbin/sshd   
100000   25863  0.0  0.0  30488   472 ?        Ss   15:20   0:00 /usr/sbin/sshd   
root     29487  0.0  0.0   8324   828 pts/2    S+   15:30   0:00 grep --colour=auto sshd
root #

So as you can see, the sshd process is running under user with uid 100000 on the host machine and has a different PID.

Basic actions with containers

Listing containers

root #  lxc ls
+-------+---------+-----------------------+------------------------------------------------+------------+-----------+
| NAME  |  STATE  |         IPV4          |                      IPV6                      |    TYPE    | SNAPSHOTS |
+-------+---------+-----------------------+------------------------------------------------+------------+-----------+
| fun-1 | RUNNING | 10.214.101.187 (eth0) | fd42:156d:4593:a619:a5ad:edaf:7270:e6c4 (eth0) | PERSISTENT | 0         |
|       |         |                       | fd42:156d:4593:a619:216:3eff:fef7:c1c2 (eth0)  |            |           |
+-------+---------+-----------------------+------------------------------------------------+------------+-----------+

lxc ls also accepts arguments as filters. For example lxc ls web will list all containers that have web in their name.

Container details

root # lxc info c1
Name: c1
Remote: unix://
Architecture: x86_64
Created: 2017/09/08 02:07 UTC
Status: Running
Type: persistent
Profiles: default, prf-funtoo
Pid: 6366
Ips:
  eth0: inet    10.214.101.79   vethFG4HXG
  eth0: inet6   fd42:156d:4593:a619:8619:546e:43f:2089  vethFG4HXG
  eth0: inet6   fd42:156d:4593:a619:216:3eff:fe4a:3d4f  vethFG4HXG
  eth0: inet6   fe80::216:3eff:fe4a:3d4f        vethFG4HXG
  lo:   inet    127.0.0.1
  lo:   inet6   ::1
Resources:
  Processes: 6
  CPU usage:
    CPU usage (in seconds): 25
  Memory usage:
    Memory (current): 69.01MB
    Memory (peak): 258.92MB
  Network usage:
    eth0:
      Bytes received: 83.65kB
      Bytes sent: 9.44kB
      Packets received: 188
      Packets sent: 93
    lo:
      Bytes received: 0B
      Bytes sent: 0B
      Packets received: 0
      Packets sent: 0

Container configuration

root #  lxc config edit c1
root ### This is a yaml representation of the configuration.
root ### Any line starting with a '# will be ignored.
root ###
root ### A sample configuration looks like:
root ### name: container1
root ### profiles:
root ### - default
root ### config:
root ###   volatile.eth0.hwaddr: 00:16:3e:e9:f8:7f
root ### devices:
root ###   homedir:
root ###     path: /extra
root ###     source: /home/user
root ###     type: disk
root ### ephemeral: false
root ###
root ### Note that the name is shown but cannot be changed

architecture: x86_64
config:
  image.architecture: x86_64
  image.description: Funtoo Current Generic Pure 64-bit
  image.name: funtoo-generic_64-pure64-funtoo-current-2016-12-10
  image.os: funtoo
  image.release: "1.0"
  image.variant: current
  volatile.base_image: e279c16d1a801b2bd1698df95e148e0a968846835f4769b24988f2eb3700100f
  volatile.eth0.hwaddr: 00:16:3e:4a:3d:4f
  volatile.eth0.name: eth0
  volatile.idmap.base: "0"
  volatile.idmap.next: '[{"Isuid":true,"Isgid":false,"Hostid":100000,"Nsid":0,"Maprange":65536},{"Isuid":false,"Isgid":true,"Hostid":100000,"Nsid":0,"Maprange":65536}]'
  volatile.last_state.idmap: '[{"Isuid":true,"Isgid":false,"Hostid":100000,"Nsid":0,"Maprange":65536},{"Isuid":false,"Isgid":true,"Hostid":100000,"Nsid":0,"Maprange":65536}]'
  volatile.last_state.power: RUNNING
devices: {}
ephemeral: false
profiles:
- default
- prf-funtoo
stateful: false
description: ""

One can also add environment variables. 

root # lxc config set <container> environment.LANG en_US.UTF-8
root # lxc config set <container> environment.LC_COLLATE POSIX

Managing files

Snapshots

Cloning, copying and moving containers

Resource control

LXD offers a variety of resource limits. Some of those are tied to the container itself, like memory quotas, CPU limits and I/O priorities. Some are tied to a particular device instead, like I/O bandwidth or disk usage limits.

As with all LXD configuration, resource limits can be dynamically changed while the container is running. Some may fail to apply, for example if setting a memory value smaller than the current memory usage, but LXD will try anyway and report back on failure.

All limits can also be inherited through profiles in which case each affected container will be constrained by that limit. That is, if you set limits.memory=256MB in the default profile, every container using the default profile (typically all of them) will have a memory limit of 256MB.

Disk

Setting a size limit on the container’s filesystem and have it enforced against the container. Right now LXD only supports disk limits if you’re using the ZFS or btrfs storage backend.

To set a disk limit (requires btrfs or ZFS): 

root # lxc config device set c1 root size 20GB

CPU

To just limit a container to any 2 CPUs, do: 

root # lxc config set c1 limits.cpu 2

To pin to specific CPU cores, say the second and fourth: 

root # lxc config set c1 limits.cpu 1,3

More complex pinning ranges like this works too: 

root # lxc config set c1 limits.cpu 0-3,7-11

Memory

To apply a straightforward memory limit run: 

root # lxc config set c1 limits.memory 256MB

(The supported suffixes are kB, MB, GB, TB, PB and EB)

To turn swap off for the container (defaults to enabled): 

root # lxc config set c1 limits.memory.swap false

To tell the kernel to swap this container’s memory first: 

root # lxc config set c1 limits.memory.swap.priority 0

And finally if you don’t want hard memory limit enforcement: 

root # lxc config set c1 limits.memory.enforce soft

Network

Block I/O

Resource limits using profile - Funtoo Containers example

So I am going to create 3 profiles to mimic the resource limits for current Funtoo Containers.

PriceRAMCPU ThreadsDisk SpaceSign Up
$15/mo4GB6 CPU Threads50GBSign Up! (small)
$30/mo12GB12 CPU Threads100GBSign Up! (medium)
$45/mo48GB24 CPU Threads200GBSign Up! (large)

I am going to create one profile and copy/edit it for the remaining two options. 

root # lxc profile create res-small
root # lxc profile edit res-small
config:
  limits.cpu: "6"
  limits.memory: 4GB
description: Small Variant of Funtoo Containers
devices:
  root:
    path: /
    pool: default
    size: 50GB
    type: disk
name: small
used_by: []
root # lxc profile copy res-small res-medium
root # lxc profile copy res-small res-large
root # lxc profile set res-medium limits.cpu 12
root # lxc profile set res-medium limits.memory 12GB
root # lxc profile device set res-medium root size 100GB
root # lxc profile set res-large limits.cpu 24
root # lxc profile set res-large limits.memory 48GB
root # lxc profile device set res-large root size 200GB

Now let's create a container and assign the res-small and funtoo profiles to it. 

root # lxc init funtoo c-small
root # lxc profile assign c-small res-small
root # lxc profile add c-small funtoo

Image manipulations

Remote hosts

Running systemd container on a non-systemd host

To use systemd in the container, a recent enough (>=4.6) kernel version with support for cgroup namespaces is needed. Additionally the host needs to have a name=systemd cgroup hierarchy mounted: 

root # mkdir -p /sys/fs/cgroup/systemd
root # mount -t cgroup -o none,name=systemd systemd /sys/fs/cgroup/systemd
   Note

Doing so does not require running systemd on the host, it only allows to run systemd correctly inside the container(s) .

If you want to get systemd hierarchy mounted automatically on system startup, using /etc/fstab will not work, but the No results can be used for this. First you needed to edit the /etc/cgroup/cgconfig.conf and add:

   /etc/cgroup/cgconfig.conf 
mount {
    "name=systemd" = /sys/fs/cgroup/systemd;
}

Then you need to start the cgconfig daemon: 

root # rc-service cgconfig start

The daemon can be started as needed, or automatically at system start by simply adding it to default group: 

root # rc-update add cgconfig default

List of tested and working images

These are images from the https://images.linuxcontainers.org repository available by default in lxd. You can list all available images by typing following command (beware the list is very long): 

root # lxc image list images:
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
|              ALIAS              | FINGERPRINT  | PUBLIC |               DESCRIPTION                |  ARCH   |   SIZE   |          UPLOAD DATE          |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.3 (3 more)             | ef69c8dc37f6 | yes    | Alpine 3.3 amd64 (20171018_17:50)        | x86_64  | 2.00MB   | Oct 18, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.3/armhf (1 more)       | 5ce4c80edcf3 | yes    | Alpine 3.3 armhf (20170103_17:50)        | armv7l  | 1.53MB   | Jan 3, 2017 at 12:00am (UTC)  |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.3/i386 (1 more)        | cd1700cb7c97 | yes    | Alpine 3.3 i386 (20171018_17:50)         | i686    | 1.84MB   | Oct 18, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.4 (3 more)             | bd4f1ccfabb5 | yes    | Alpine 3.4 amd64 (20171018_17:50)        | x86_64  | 2.04MB   | Oct 18, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.4/armhf (1 more)       | 9fe7c201924c | yes    | Alpine 3.4 armhf (20170111_20:27)        | armv7l  | 1.58MB   | Jan 11, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.4/i386 (1 more)        | 188a31315773 | yes    | Alpine 3.4 i386 (20171018_17:50)         | i686    | 1.88MB   | Oct 18, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.5 (3 more)             | 63bebc672163 | yes    | Alpine 3.5 amd64 (20171018_17:50)        | x86_64  | 1.70MB   | Oct 18, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
| alpine/3.5/i386 (1 more)        | 48045e297515 | yes    | Alpine 3.5 i386 (20171018_17:50)         | i686    | 1.73MB   | Oct 18, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
...
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
|                                 | fd95a7a754a0 | yes    | Alpine 3.5 amd64 (20171016_17:50)        | x86_64  | 1.70MB   | Oct 16, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
|                                 | fef66668f5a2 | yes    | Debian stretch arm64 (20171016_22:42)    | aarch64 | 96.56MB  | Oct 16, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
|                                 | ff18aa2c11d7 | yes    | Opensuse 42.3 amd64 (20171017_00:53)     | x86_64  | 58.92MB  | Oct 17, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+
|                                 | ff4ef0d824b6 | yes    | Ubuntu zesty s390x (20171017_03:49)      | s390x   | 86.88MB  | Oct 17, 2017 at 12:00am (UTC) |
+---------------------------------+--------------+--------+------------------------------------------+---------+----------+-------------------------------+

These are the images that are known to work with current LXD setup on Funtoo Linux:

Image Init Status
CentOS 7 systemd Working
Debian Jessie (8) - EOL April/May 2020 systemd Working (systemd - no failed units)
Debian Stretch (9) - EOL June 2022 systemd Working
Fedora 26 systemd with cgroup v2 Not Working
Fedora 25 systemd Working
Fedora 24 systemd Working
Oracle 7 systemd Working (systemd - no failed units)
OpenSUSE 42.2 systemd Working
OpenSUSE 42.3 systemd Working
Ubuntu Xenial (16.04 LTS) - EOL 2021-04 systemd Working
Ubuntu Zesty (17.04) - EOL 2018-01 systemd Working
Alpine 3.3 OpenRC Working
Alpine 3.4 OpenRC Working
Alpine 3.5 OpenRC Working
Alpine 3.6 OpenRC Working
Alpine Edge OpenRC Working
Archlinux systemd with cgroup v2 Not Working
CentOS 6 upstart Working (systemd - no failed units)
Debian Buster systemd with cgroup v2 Not Working
Debian Sid systemd with cgroup v2 Not working
Debian Wheezy (7) - EOL May 2018 ? ? (more testing needed)
Gentoo OpenRC Working (all services started)
Oracle 6 upstart ? (mount outputs nothing)
Plamo 5 ? ?
Plamo 6 ? ?
Sabayon systemd with cgroup v2 Not Working
Ubuntu Artful (17.10) - EOL 2018-07 systemd with cgroup v2 Not Working
Ubuntu Core 16 ? ?
Ubuntu Trusty (14.04 LTS) - EOL 2019-04 upstart Working
Retrieved from "https://www.funtoo.org/index.php?title=LXD&oldid=20616"