Note

The Funtoo Linux project has transitioned to "Hobby Mode" and this wiki is now read-only.

Talk:Install/Prepare Disk

From Funtoo
Revision as of 10:11, December 5, 2020 by Pnoecker (talk | contribs) (staging support for people installing from systemd based distributions.)
Jump to navigation Jump to search

first rule of funtoo is funtoo rules

set udev rules to make the drive you're installing to accessible at /dev/funtoo and partitions accessible at /dev/funtoo1 /dev/funtoo2 so on.

  • ide drive 3 example:
root # echo 'KERNEL=="hdd*", SYMLINK+="funtoo%n"' > /etc/udev/rules.d/01-funtoo.rules
  • sata drive 2 example:
root # echo 'KERNEL=="sdc*", SYMLINK+="funtoo%n"' > /etc/udev/rules.d/01-funtoo.rules
  • nvme nvme drive 1 example:
root # echo 'KERNEL=="nvme1n1", SYMLINK+="funtoo"' > /etc/udev/rules.d/01-funtoo.rules
root # echo 'KERNEL=="nvme1n1p*", SYMLINK+="funtoo%n"' >> /etc/udev/rules.d/01-funtoo.rules
  • mmc drive 0 example:
root # echo 'KERNEL=="mmcblk0", SYMLINK+="funtoo"' > /etc/udev/rules.d/01-funtoo.rules
root # echo 'KERNEL=="mmcblk0p*", SYMLINK+="funtoo%n"' >> /etc/udev/rules.d/01-funtoo.rules
root # rc-service udev-trigger restart
  • systemd udev test command:
root # sudo udevadm control --reload-rules && sudo udevadm trigger
Retrieved from "https://www.funtoo.org/index.php?title=Talk:Install/Prepare_Disk&oldid=34610"