Partitioning in Action, Part 2

Consolidating data

In this second tip on changing partition layout on a running system, Daniel Robbins shows you how to move /tmp and /var to their own shared partition. He also covers several tricks of the trade to minimize downtime and avoid making costly mistakes.

   Support Funtoo!

Get an awesome Funtoo container and support Funtoo! See Funtoo Containers for more information.

Consolidating data

Introduction

In my last tip, we successfully moved /home to a new partition. Now, it's time to learn how to consolidate often-modified files onto a new partition. Why would we want to do this? Here's an example. Often-modified files contribute heavily to fragmentation. One of the best ways to contain fragmentation is to store often-modified files on their own partition. That way, the other partitions are unaffected by the fragmentation caused by the heavily modified files. In concept, this is easy to understand, but how do you actually go about doing it?

First, you must create a new partition for the specific purpose of storing frequently modified files. You might want to locate this partition on a separate disk to enhance performance. Then, I'll walk you through the steps required to move both /tmp and /var to this new partition.

   Warning

The following technique describes how to move a partition(s). Although this technique is designed so that you can "back out" of a failed partition move, it doesn't protect against user error. In other words, any time that you format partitions or copy large numbers of files, there's a possibility that you will type the wrong thing, causing lots of data to be destroyed. For this reason, it's highly recommended that you take appropriate steps to back up all critical files before proceeding.

Create a filesystem on the new partition

The first step of this process is to create a new partition that's big enough to hold /var and /tmp, with a little extra space left over. You'll need either an additional drive, or a spare (unused) partition that will house the often-modified files. If you do need to use fdisk or cfdisk to create the partition, you'll need to reboot once. Then, it's time to format the new partition as follows (it's OK to be in multiuser mode while you do this; I'll let you know when to switch to single-user):

root # mkfs.ext2 /dev/???

Mount it to /mnt/rwstorage

As in my previous tip, ??? should be replaced with the device name for the new, empty partition that you are creating. Accidentally typing the wrong name will destroy data on an existing partition, so be careful! After typing this command, you'll have a brand-new ext2 filesystem on the new partition. We're almost ready to mount it, but first, let's make a new mount point.

root # mkdir /mnt/rwstorage

I chose the name rwstorage to remind us that this particular partition is going to be specifically used to house files that are read from and written to frequently. To mount the partition, type:

root # mount /dev/??? /mnt/rwstorage

Creating a new /tmp

The partition is now mounted and we're ready to create our new /tmp directory:

root # cd /mnt/rwstorage
root # mkdir tmp
root # chmod 1777 tmp

Drop to single-user mode

Our new directory at /mnt/rwstorage/tmp has the right permissions for a temporary directory. Now, drop to single-user mode, since we must copy over /var. As usual, we've delayed our drop to single-user mode to the last possible moment. Right now, we don't want any programs reading or writing files in /var, so we have to stop all daemons, disconnect all users, and do some quick maintenance by typing:

root # init 1

If you're prompted to enter a password to perform system maintenance, do so. You should now have a root shell, and all unnecessary daemons will be stopped. Create a new location for our /var files by typing:

root # cd /mnt/rwstorage
root # mkdir var

Copy /var

Default permissions on our new /mnt/newstorage/var directory should be correct, so now we're ready to copy all of our original /var data over to the new partition:

root # cd /var 
root # cp -ax * /mnt/rwstorage/var

Back up and create symlinks

After this command completes, you'll have an exact copy of /var at /mnt/rwstorage/var. Now, you may be asking how exactly we get Linux to use /mnt/rwstorage/var and /mnt/rwstorage/tmp instead of the defaults in the root directory. This is easily done by the use of symbolic links -- we'll create the new symbolic links, /tmp and /var, which point to the correct directories in /mnt/rwstorage. First, let's back up the original directories:

root # cd /
root # mv var var.old
root # mv tmp tmp.old

The last line probably isn't necessary, since it's very likely that you don't have anything important in /tmp, but we're playing it safe. Now, let's create the symlinks:

root # cd /
root # ln -s /mnt/rwstorage/var /var
root # ln -s /mnt/rwstorage/tmp /tmp

Finishing touches to /etc/fstab

Now, when any user or program uses /var, they'll automatically be transported to /mnt/rwstorage/var! Likewise for /tmp. We have one step left; however, it can be safely performed in multiuser mode. It's time to get Apache running again, and to allow all your users to log back in. Exit from runlevel 1 by pressing CTRL-D. The system should start up normally. Log in as root.

The final thing we must do is configure /etc/fstab so that /dev/??? is mounted at /mnt/rwstorage. You must add a line like the following to your /etc/fstab:

/dev/???   /mnt/rwstorage   ext2   defaults   1   2

After saving the changes to /etc/fstab, your system has been successfully upgraded! After verifying that everything is working properly, you'll want to remove the /tmp.old and /var.old backup directories. Congratulations -- you've successfully reconfigured your system's partitions for optimum performance.

   Note

Browse all our available articles below. Use the search field to search for topics and keywords in real-time.

	Article	Subtitle
	Article	Subtitle
	Awk by Example, Part 1	An intro to the great language with the strange name
	Awk by Example, Part 2	Records, loops, and arrays
	Awk by Example, Part 3	String functions and ... checkbooks?
	Bash by Example, Part 1	Fundamental programming in the Bourne again shell (bash)
	Bash by Example, Part 2	More bash programming fundamentals
	Bash by Example, Part 3	Exploring the ebuild system
	BTRFS Fun
	Funtoo Filesystem Guide, Part 1	Journaling and ReiserFS
	Funtoo Filesystem Guide, Part 2	Using ReiserFS and Linux
	Funtoo Filesystem Guide, Part 3	Tmpfs and Bind Mounts
	Funtoo Filesystem Guide, Part 4	Introducing Ext3
	Funtoo Filesystem Guide, Part 5	Ext3 in Action
	GUID Booting Guide
	Learning Linux LVM, Part 1	Storage management magic with Logical Volume Management
	Learning Linux LVM, Part 2	The cvs.gentoo.org upgrade
	Libvirt
	Linux Fundamentals, Part 1
	Linux Fundamentals, Part 2
	Linux Fundamentals, Part 3
	Linux Fundamentals, Part 4
	LVM Fun
	Making the Distribution, Part 1
	Making the Distribution, Part 2
	Making the Distribution, Part 3
	Maximum Swappage	Getting the most out of swap
	On screen annotation	Write on top of apps on your screen
	OpenSSH Key Management, Part 1	Understanding RSA/DSA Authentication
	OpenSSH Key Management, Part 2	Introducing ssh-agent and keychain
	OpenSSH Key Management, Part 3	Agent Forwarding
	Partition Planning Tips	Keeping things organized on disk
	Partitioning in Action, Part 1	Moving /home
	Partitioning in Action, Part 2	Consolidating data
	POSIX Threads Explained, Part 1	A simple and nimble tool for memory sharing
	POSIX Threads Explained, Part 2
	POSIX Threads Explained, Part 3	Improve efficiency with condition variables
	Sed by Example, Part 1
	Sed by Example, Part 2
	Sed by Example, Part 3
	Successful booting with UUID	Guide to use UUID for consistent booting.
	The Gentoo.org Redesign, Part 1	A site reborn
	The Gentoo.org Redesign, Part 2	The Documentation System
	The Gentoo.org Redesign, Part 3	The New Main Pages
	The Gentoo.org Redesign, Part 4	The Final Touch of XML
	Traffic Control
	Windows 10 Virtualization with KVM