Funtoo Linux Kernels/pt-br

Overview of Kernels

sys-kernel/vanilla-sources

Isso vai instalar os fontes do kernel Linux "vanilla" (não modificado). A versão atual recomendada é a 3.x. Funtoo Linux que tem suporte totalmente ao Linux 3.x. As vantagens desse kernel incluem melhoramentos recentes ao Linux Containers, uma pilha de rede atual (networking stack) com muitas correções de bug, e alta confiabilidade para desktops e servidores. O lado negativo é que esse kernel deve ser configurado manualmente pelo usuário e não possui built-in genkernel suporte via a flag USE binary desta vez.

No results

This kernel tree is based on stable kernels from kernel.org with genpatches applied genpatches. Gentoo patchset aims to support the entire range of Gentoo-supported architectures. List of available genpatched kernels: genpatches-kernels

No results

This is a RHEL6-based kernel with OpenVZ support. This kernel is now the preferred kernel for production OpenVZ deployments. It requires gcc-4.4.5 to build, which it will use automatically without the user needing to use gcc-config. We use this version of gcc since this is the version of gcc used by Red Hat to build this kernel.

sys-kernel/debian-sources

This is the Debian kernel. These ebuilds now support the binary USE flag. Daniel has added a special config-extract command which can be used to list all available official Debian kernel configurations, and generate them from the Debian files included with the kernel. This kernel has optional OpenVZ support, but it is much better to use openvz-rhel6-stable if you want a production-quality OpenVZ installation. For more information about how to use debian-sources and config-extract, see Using debian-sources with Genkernel below.

Binary USE

Many of the kernel ebuilds in Funtoo Linux support the very useful binary USE flag. By enabling this USE flag and emerging the kernel, the ebuild will automatically build a binary kernel image, initramfs and kernel modules and install them to /boot. The binary kernel image and initramfs can be used to boot your Funtoo Linux system without requiring any additional configuration. This is a great way to get a Funtoo Linux system up and running quickly. Here's how to do it:

root # echo "sys-kernel/openvz-rhel6-stable binary" >> /etc/portage/package.use
root # emerge openvz-rhel6-stable
root # nano -w /etc/boot.conf
root # boot-update

More information can be found in the Funtoo Linux Installation Guide.

Funtoo Linux Genkernel

Funtoo Linux contains a forked/enhanced version of genkernel with the following new capabilities:

• genkernel can use a build directory that is separate from the kernel source directory. This is enabled using the new --build-dst option.
• --build-src is a new option that is equivalent to the --kerneldir option.
• --fullname can be used to specify the entire name of the kernel and initramfs images -- everything after kernel- and initramfs-.
• --firmware-src - a new option that works identically to --firmware-dir.
• --firmware-dst - a new capability - you can now define where genkernel installs firmware.
• Genkernel uses Funtoo Linux lvm2 rather than building its own.
• Some compile fixes.

Kernel Features and Stability Overview

   Warning

SPARC64: All kernels beyond 3.9 series and before 3.14-rc8 are subject to a bug that stalls the kernel on sun4v machines only. Those latter are machines provided with UltraSPARC T1 and later CPUs (e.g. SunFire T1000, SunFire T2000, SunFire T52x0/T54x0 series...), all sun4u machines (UltraSPARC IV and prior CPUs) are not subject to this problem and any kernel version is functional.

Kernel Name	Version	USE flags	Stability	Extra Features	Req'd udev	Notes
sys-kernel/vanilla-sources	3.17.0	N/A	Excellent - recommended for desktops and servers.	N/A	Any	Recommended for modern networking stack, hardware and Linux Containers support. This kernel must be manually configured by the user. New Features: kernelnewbies.org/linux_3.12 New Drivers: kernelnewbies/Linux_3.12-DriversArch
No results	3.17.0	N/A	Excellent - recommended for desktops and workstations	N/A	Any	Recommended for modern networking stack, hardware and Linux Containers support. This kernel must be manually configured by the user. New Features: kernelnewbies.org/linux_3.12 New Drivers: kernelnewbies/Linux_3.12-DriversArch
No results	2.6.32.042.092.2	binary	Excellent - recommended for production servers	N/A	Any	This kernel is built with gcc-4.4.5. emerge broadcom-netxtreme2 for reliable BCM5709+ support (integrated NIC)
sys-kernel/debian-sources	3.16.2, 3.16.7, 3.19.3	openvz	Good - default kernel recommended by Funtoo	OpenVZ (optional)	Any	See #Using debian-sources with Genkernel, below.

Using Debian-Sources with Genkernel

   Important

Debian-sources is now fully compatible with the binary USE flag and recommended for desktop users. The below example is valid for manual installation. At least 12G of /var/tmp required to build

This section describes how to build a binary kernel with debian-sources and genkernel, and it also explains how to use Funtoo Linux's config-extract tool to list and create official Debian kernel configurations.

First step: emerging the required packages

The first step is to emerge:

1. The Debian sources
2. Genkernel itself

This is achieved by running the following:

root # emerge -av sys-kernel/debian-sources sys-kernel/genkernel

Once the Debian kernel sources are deployed, you should find a directory named linux-debian-version (e.g. linux-debian-2.6.32.30) under /usr/src. Update your the linux symlink to point on this directory:

root # cd /usr/src
root # rm linux
root # ln -s linux-debian-2.6.32.30 linux

Alternatively, emerge the debian-sources with the symlink USE flag.

Second step: Grabbing a configuration file

If is now time to download the kernel configuration file. For this tutorial we will use a configuration file for AMD64 (several others architectures like MIPS or SPARC64 are available.) To view a complete list of available kernel configurations, type ./config-extract -l in the Debian kernel source directory:

ninja1 linux-debian-2.6.32.30 # ./config-extract -l

====== standard featureset ======

       alpha: alpha-generic, alpha-legacy, alpha-smp
       amd64
       armel: iop32x, ixp4xx, kirkwood, orion5x, versatile
        hppa: parisc, parisc-smp, parisc64, parisc64-smp
        i386: 486, 686, 686-bigmem, amd64
        ia64: itanium, mckinley
        m68k: amiga, atari, bvme6000, mac, mvme147, mvme16x
        mips: 4kc-malta, 5kc-malta, r4k-ip22, r5k-ip32, sb1-bcm91250a, sb1a-bcm91480b
      mipsel: 4kc-malta, 5kc-malta, r5k-cobalt, sb1-bcm91250a, sb1a-bcm91480b
     powerpc: powerpc, powerpc-smp, powerpc64
        s390: s390x, s390x-tape
         sh4: sh7751r, sh7785lcr
       sparc: sparc64, sparc64-smp
     sparc64: sparc64, sparc64-smp

====== vserver featureset ======

       amd64
        i386: 686, 686-bigmem
        ia64: itanium, mckinley
     powerpc: powerpc, powerpc64
        s390
       sparc
     sparc64

====== xen featureset ======

       amd64
        i386

====== openvz featureset ======

       amd64
        i386

Type config-extract -h for extended usage information:

ninja1 linux-debian-2.6.32.30 # ./config-extract -h
This work is free software.

Copyright 2011 Funtoo Technologies. You can redistribute and/or modify it under
the terms of the GNU General Public License version 3 as published by the Free
Software Foundation. Alternatively you may (at your option) use any other
license that has been publicly approved for use with this program by Funtoo
Technologies (or its successors, if any.)

usage: config-extract [options] arch [featureset] [subarch]

  -h  --help        print this usage and exit
  -l  --list        list all available kernel configurations
  -o  --outfile     specify kernel config outfile --
                    defaults to .config in current directory
  [featureset]      defaults to "none" if not specified
  [subarch]         defaults to the only one available; otherwise required

This program was written by Daniel Robbins for Funtoo Linux, for the purpose of
easily and conveniently extracting Debian kernel configurations. To see a nice
list of all available kernel configurations, use the --list option.

Debian's kernel configs are specified internally in arch_featureset_flavor
format, such as: "amd64_openvz_amd64". The featureset typically describes an
optional kernel configuration such as "xen" or "openvz", while the flavor in
Debian terminology typically refers to the sub-architecture of the CPU.

When using this command, you must specify an arch. A featureset of "none" is
assumed unless you specify one, and by default this program will pick the only
available subarch if there is only one to choose from. If not, you will need to
pick one (and the program will remind you to do this.)

The kernel configuration will be written to ".config" in the current directory,
or the location you specified using the -o/--outfile option.

Let's use config-extract to create a kernel configuration for an amd64 system:

root # cd linux
root # ./config-extract amd64
Wrote amd64_none_amd64 kernel configuration to /usr/src/linux-debian-2.6.32.30/.config.

config-extract also allows you to extract special Debian featuresets, such as settings for Xen and OpenVZ kernels:

root # ./config-extract amd64 openvz
Wrote amd64_openvz_amd64 kernel configuration to /usr/src/linux-debian-2.6.32.30/.config.

It is necessary to name the kernel configuration file something other than ".config" to avoid errors with genkernel.

After using config-extract, run make oldconfig and accept all default options by hitting Enter at all prompts.

   Note

if you are using the XFS file system as your root partition: Run make menuconfig and ensure that "File Systems --> XFS filesystem support" and "Library Routines --> CRC32c (Castagnoli, et al) Cyclic Redundancy-Check" are both set to * (and not [m]).

This is needed to ensure that your system can boot up correctly for kernel versions >= 3.10.11.

Third step: Building and installing the kernel

This is simply achieved by:

root # genkernel --kernel-config=config-2.6.32-5-amd64 all

• --kernel-config: use the given configfile. If you only give a filename here, it is searched for in your current working dir. You can also use a relative or an absolute path leading to your configfile here (for example: "--kernel-config=/usr/src/linux/configfile").
• all: rebuild the kernel image and the initramfs ramdisk image (aside of kernel modules, the ramdisk image contains tools such as BusyBox and some generic startup scripts, depending on options you use on the command line several additional tools like lvm or raid volume management can be incorporated as well).

   Important

Unless explicitly stated via --no-clean or --no-mrproper, Genkernel will do a make mrproper in the kernel source tree, thus cleaning a previous build and removing the previous kernel configuration file in it.

If you use Genkernel to rebuild a Linux kernel on SPARC64, remember to either:

• Set sparc64-unknown-linux-gnu- in General setup --> Cross-compiler tool prefix
• Put --kernel-cross-compile=sparc64-unknown-linux-gnu- on the Genkernel command line

Once the kernel has been compiled and the ram disk has been generated, the kernel image plus its companion files (initramfs image and System.map) are placed in the /boot directory. You can use your favourite tool to update your bootloader configuration files.