Install/Prepare Disk/zh-cn

安装指南：准备磁盘

Install Guide, Chapter 2

< Prev

Next >

在本节中，需要选择一种用于启动和分区的磁盘格式—— MBR 或 UEFI/GPT。如果你不熟悉这些选项之间的差异，请查看我们的磁盘格式页面，了解每个选项的概述和权衡。一般来说，对于 2TB 以下的系统盘，选择传统的 MBR 方法通常是安全的，而且大多数现代 PC 系统既支持 MBR 也支持 UEFI 启动。

但首先......

在对磁盘进行任何操作之前，请确保你的分区是正确的。使用 lsblk 命令查看系统中所有块设备的列表，以及这些块设备上的分区：

root # lsblk
NAME          MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda             8:0    0  1.8T  0 disk 
├─sda1          8:1    0  512M  0 part 
├─sda2          8:2    0    8G  0 part [SWAP]
└─sda3          8:3    0  1.8T  0 part 
  ├─main-root 254:0    0  500G  0 lvm  /
  └─main-data 254:1    0  1.3T  0 lvm  /home

   Note

If you're not sure which disks are which, you can use lsblk -o MODEL,NAME,SIZE to show the device models matching the /dev/sd? names.

Make sure you will not be overwriting any important data and that you have chosen the correct /dev/sd? device. Above, you can see that SATA disk sda contains three partitions, sda1, sda2 and sda3, and that sda3 contains LVM volumes. If you are using an NVME disk, then you may see nvme0n1 as your disk, and your partitions (if any exist yet) will be named nvme0n1p1, nvme0n1p2, etc. If you are installing on microSD Card for Raspberry Pi, your disk will likely be mmcblk0 and partitions will have suffixes p1, p2, etc.

一旦你仔细检查了目标块设备，并确定将会对磁盘进行正确的分区，就继续下一步。

Install Guide, Chapter 2

< Prev

Next >